The Power of Copper

Copper is a malleable, and ductile metal with very high thermal and electrical conductivity. It’s nearly twice as thermal conductive as aluminum. However, 3 times as costly as aluminum normally making it the choice material for only the most thermal critical components such as heatpipes and heatsink bases.

Back Side

Fiberglass enhanced plastic backplate is both sturdy and minimal in design, avoiding backside components.

Front Side

Kept in the CPU Keep Out Zone, means zero problems with front side RAM slots or components.

Back Side (optional)

In case of added backside components, the backplate can be replaced by the included washers to avoid interference.

Made for Small Form Factor ITX
Max Size to Performance Ratio

The C7 Cu is made to solve heatsink size limitations in SFF/ITX systems, unleash your CPU! With a total height of 47mm including heatsink and fan, the C7 Cu is in the same height range of stock heatsinks. Meaning the C7 Cu can fit and go into any system that is compatible with CPU stock coolers.

Extra Air
in Tight Spaces
With Quad Air Intake

In most SFF/ITX systems there’s limited space between the top of the heatsink and the case panel limiting fan front air intake. CRYORIG’s patent Quad Air Intake, adds four aero dynamic intakes in the corners of the fan pulling extra airflow from the sides of the fan.

Nullify Vibrations With
Built In Acoustic Absorbers

Included with every C7 Cu fan are four pre-installed integrated Acoustic Absorbers. These thick silicon pads form a buffer between the fan and heatsink body, nullifying unwanted vibration noise.