Breaking Design Molds
Efficiency by Innovation
CRYORIG H Series coolers feature our proprietary Hive Fin™ structure. This design allows for a combination of Jet Fin Acceleration™ and Turbulence Reduction, as well as strengthening structural strength of the fin stacks. Combined together, the Hive Fin™ design brings cool innovation.
Air Exhaust Acceleration
Hot Air Cooled Fast
By utilizing a larger air intake and narrower air exhaust section on the fins, compresses the air to move faster while exiting the heatsink. Jet Fin Acceleration System™ carries the hot air out of the system faster and more efficiently.
Turbulence Reduction System
Utilizing a bee hive shaped structure at the front air intake of the heatsink, lowers air turbulence and straightens out the airflow. Assisting airflow to move directly through the full length of the heatsink and carrying out hot air.
Total CPU Coverage
The H7’s Heatpipe Convex-Align™ System allows for more heatpipes in a given area, optimized heatpipe placement in the copper base, and improved alignment with your CPU. With the Heatpipe Convex-Align™ System, each heatpipe functions to their maximum TDP capacity.
Quad Air Inlet™
CRYORIG’s proprietary Quad Air Inlet™ system features four strategically placed aerodynamic air inlet that allows for extra air intake. The additional air intake allows the QF series fan to have a higher air output volume for its fan diameter, which equals better temperatures for your CPU heatsink and more air exchanged for your system case.
Zero RAM Interference
Focusing on providing the widest range of
compatibility, the H7 utilizes an asymmetric slanted
heatpipe layout to move the heatsink away from the
RAM zone, Offering optimal compatibility for RAM
with tall heat spreaders on both Intel 115X and
Patent Pending X-Bar™
Quick Mount System
Fast, Easy and Secure
Our new patent pending X-Bar™ Quick Mount System follows CRYORIG’s renowned mounting system design, and provides a quick and secure solution on both Intel and AMD platforms. The X-Bar™ system’s dedicated backplate is made from fiber glass augmented PBT, for higher tensile strength, resistance to heat and is more easily recyclable than other plastics. The backplate protects the mainboard from excessive stress that may come from the mounted heatsink, and also provides a solid base for your fast and secure installation.
The Compact Tower That Fits
The CRYORIG H7 has compact compatibility written in it’s design. Only 145mm in height the H7 is one of the smallest 120mm fan class tower heatsinks on the market. The H7 will fit in almost all mid-tower PC chassis. The H7 can deliver much needed tower grade cooling performance in tight spaces.
Animated Install Guides Now On Handhelds!
Beginning with the CRYORIG H7, checking step-by-step installation videos will be as easy as holding your phone up.
Ever Feel Stuck?
View and Repeat!
Ever felt stuck on one step on the installation manual? Now for users upgrading an existing system or without access to a PC, just pick up your phone and scan the QR Code on the upper right corner of each step to be directly linked to a video demonstration! All you need is an Android, iOS or Windows Phone compatible device and working internet connection to view detailed demos on how to install your CRYORIG right.
|Dimension ( with fan )||L98 mm x W123 mm x H145 mm|
|Weight ( with fan )||711 g|
|Weight ( without fan )||577 g|
|Heat pipes||6mm heatpipe x 3 units|
|Fin||T = 0.4 mm ; Gap = 2.2 mm|
|Front Fin Pcs||40 pcs|
|Copper Base||C1100 Pure copper nickel plated|
|RAM Tolerance Height||Limitless|
|QF120 BALANCE SPECIFICATION|
|Dimension||L120 mm x W120 mm x H25.4 mm|
|Rated Speed||330 ~ 1600 RPM ±10 %|
|Noise Level||10 ~ 25 dBA|
|Air Flow||49 CFM|
|Air Pressure||1.65 mmH2O|
|INSTALLATION GUIDE||FAQ||PRODUCT WARRANTY|
|Download the most up to date version of our installation guide in PDF format.||Have questions about the product? Look up our FAQ section to find an answer!||Read more about our Warranty Policy and find out how your product is protected.|
|DOWNLOAD FILE||HEAD TO FAQ||WARRANTY POLICY|
|Register your product now to receive up to 3 years of extended warranty!||Can’t find information you’re looking for? Our customer support is here for you!|
|REGISTER NOW||CUSTOMER SUPPORT|
The Easiest Way To
Check if CRYORIG Fits
At CRYORIG, we are always coming up with new
ideas on how to improve our user experience.
Taking into account of the multitude of
hardware combinations and the speed of
new hardware hitting the market, we have
come up with a innovative way of
helping users solve the question
of “Will it Fit?” in true modding/DIY
Enter the CRYORIG ORIGAMI
COMPATIBILITY TESTER! All you need is a
printer, some A4 sized paper, a ruler, and a pair
of scissors to make your own CR ORIGAMI
TESTER! Please always use recycled materials
or used paper if available.
DOWNLOAD H7 TESTER
First choose the CRYORIG Heatsink Model of choice, and select the correct socket type of your mainboard.
Print your plans with a printer onto a piece of A4 sized paper.When printing making sure to use the following print options: Actual Size/True Size and Uncheck Fit To Page. Then use the Scale Check Zone at the bottom of the print out with your ruler, to see if you have a 1:1 print. Printing on thin cardboard or thicker materials are suggested but not required.
Follow the scissor icon and cutout each part of the CR ORIGAMI TESTER. You will end up with the three parts: FIN, BASE TESTER and PIPE.
Fold the dotted lines on the FIN, BASE TESTER and PIPE. Glue or tape the winglet on the BASE TESTER to complete.
Combine the FIN, PIPE and BASE TESTER according to order.
Now place the BASE of the CR ORIGAMI TESTER directly on top of your CPU, so that the four sides of the BASE wraps perfectly around the protruding lid of the CPU. Now check If any sides or elements of the CR ORIGAMI TESTER interferes and or is bent by the components, then the compatibility test has been failed. If your CR ORIGAMI TESTER is not interfered by anything, then you have passed the compatibility test! Please note that our heatsink are mountable in different directions and orientations. If one direction does not fit, you can always try the tester in a different direction.
SHOW YOUR RIG
Upload your H7 based rig photos for a chance to have it shown on CRYORIG.com and CRYORIG social media!
Click on the awards below to read reviews conducted by profession media, review sites and forum power users.
CRYORIG H7 - kompakter Towerkühler im Überblick
m4gic Protip Award
Zenchillis Hardware Reviews_DE
CRYORIG H7 - EINBAU / INSTALLATION - Intel + AMD
Silver Wheel Award
CRYORIG H7 (CPU-Kühler )- Unboxing | Ger | HD
Innovation & Gold Award
"Cryorig se ha convertido en sinónimo de rendimiento y calidad."
"Cryorig has become synonymous with performance and quality."
"Para resumir podemos decir que el Cryorig H7 es un magnífico disipador de gama media."
"To summarize, we can say that the Cryorig H7 is a great midrange cooler."
5 Stars Award
Cooler CPU CRYORIG H7 - Review
"El Cryorig H7 es quizás uno de los mejores disipadores semi-compactos que podemos encontrar en el mercado"
"The Cryorig H7 is perhaps one of the best semi-compact heat sinks can find on the market”
Présentation Cryorig H7
"Si vous êtes à la recherche d'un ventirad avec une excellente qualité de fabrication, un tarif attractif et des performances très acceptables pour un processeur aux fréquences d'origine ou légèrement overclocké alors le Cryorig H7 ne pourra qu'être un bon choix."
"Une nouvelle fois CRYORIG ne nous déçoit pas, le H7 est digne de faire partie de la famille… malgré un encombrement plutôt réduit"
"CRYORIG again does not disappoint us, the H7 is worthy to be part of the family ... despite a rather small dimensions"
Αερόψυξη Cpu CRYORIG H7 Greek Review & Unboxing
Gold & Best Buy Award
The best part about Cryorig is that they provided a QR code in manual and you can just scan and it will leads you to the installation video guide. They are very much concerned about compatibility of hardware.
Smart Buy Award
BLACK WHITE TV_PL
CRYORIG H7 - recenzja chłodzenia na procesor
EXPC: Review Cryorig R1 Universal @ลุงต้าพาลุย
OverclockZone TV EP.633 : CRYORIG H7 CPU cooler (HD)
"I’m amazed by this cooler, it’s design and performance are pushing way above what I would expect for this price range."
"you owe it to yourself to heavily consider this as an alternative if looking for CPU coolers on a budget- you certainly won’t be disappointed."
"Excellent compatibility and performance at affordable price."
"For an extra ~$5 it provides superior cooling performance and generates less noise than the CM 212. As the cherry on top, Cryorig's H7 also has a better installation process and arguably even looks better with its hive-fin design."
CRYORIG H7 Review & Unboxing
"Beating out the similarly priced mainstream favorite in the Cooler Master Hyper 212 EVO by around 5%, its peformance-per-dollar rating is exceptional."
"The Compact Tower That Fits. Price to performance is unbeatable! If you are on a budget and do not want to loose any cooling capabilities look no further because the H7 will exceed you expectations!"
CRYORIG H7 - Unboxing, Installation on AMD and Temps
You can get all of this style, clearance, and performance for just $34.50 is outstanding. Albeit a tad crooked, if you are a system builder, or are just looking for a more compact design that has what it takes to get the job done, then H7 is definitely worth a look.
The Cryorig H7 is a stellar performer at this price point, and may have the nicest build and finish among its competitors.
There are a lot of impressive features the Cryorig H7 CPU cooler (link is external) has. Cryorig introduced a lot of new features they developed themselves in this cooler which really made it outperform the typical cooler design.
|News & Press|
|FAN & ACCESSORIES|
|Case Depth Checker|
|Register My Product|
|Get AM4 Upgrade Kit|
|Where To Buy|
2017 Cryorig llc. All rights reserved.