H7 PLUS


The Dual Fan Enhanced Performance Tower.



Direct Air Tunnel Effect, Aligned System Airflow


By adding one additional fan the full fan system aligns with your system fan, to concentrate and expel exhaust heat.
This increases the overall efficiency of the whole system airflow.

Hive
Fin

Enhanced Efficiency with Hive Fin Technology


CRYORIG H Series coolers feature our proprietary Hive Fin™ structure. This design allows for a combination of Jet Fin Acceleration™ and Turbulence Reduction, as well as strengthening structural strength of the fin stacks. Combined together, the Hive Fin™ design brings cool innovation.

Jet Fin Acceleration System™


By utilizing a larger air intake and narrower air exhaust section on the fins, compresses the air to move faster and more efficiently out of the heatsink.

Turbulence Reduction System


Utilizing a bee hive shaped structure at the front air intake of the heatsink, lowers air turbulence and assists airflow to move through the full length of the heatsink.

Optimized Heatpipe Positioning Total CPU Coverage


The H7’s Heatpipe Convex-Align™ System allows for more heatpipes in a given area, optimized heatpipe placement in the copper base, and improved alignment with your CPU. With the Heatpipe Convex-Align™ System, each heatpipe functions to their maximum TDP capacity.

No RAM
Limit

Unmatched Compatibility Zero RAM Interference


Focusing on providing the widest range of compatibility, the H7 utilizes an asymmetric slanted heatpipe layout to move the heatsink away from the RAM zone, Offering optimal compatibility for RAM with tall heat spreaders on both Intel™ 115X and AMD platforms.

145mm

The Compact Tower That Fits


The CRYORIG H7 has compact compatibility written in it’s design. Only 145mm in height the H7 is one of the smallest 120mm fan class tower heatsinks on the market. The H7 will fit in almost all mid-tower PC chassis. The H7 can deliver much needed tower grade cooling performance in tight spaces.

Quad Air Inlet+TM, Extra Air Extra Performance


CRYORIG’s proprietary Quad Air Inlet™ system features four strategically placed aerodynamic air inlet that allows for extra air intake. The additional air intake allows the QF series fan to have a higher air output volume for its fan diameter, which equals better temperatures for your CPU heatsink and more air exchanged for your system case.

Gallery


High Resolution Media for the H7 Plus

Specification & Details

Heatsink Specification
Dimension ( with fan ) L126 mm x W123 mm x H145 mm
Weight ( with fan ) 845 g
Weight ( without fan ) 577 g
Heat pipes 6mm heatpipe x 3 units
Fin T = 0.4 mm ; Gap = 2.2 mm
Fin Pcs 40 pcs
Copper Base C1100 Pure copper nickel plated
RAM Height Limit Limitless
TDP 150 W
  
Fan Specification
ModelQF120 Black Balance
DimensionL120 mm x W120 mm x H25.4 mm
Weight134 g
Rated Speed300 ~ 1600 RPM ±10 %
Noise Level25 dBA
Air Flow59 CFM
Air Pressure1.65 mmH2O
Ampere0.16 A
Motherboard Compatibility
1150, 1151, 1155, 1156
FM1, FM2/+, AM2/+, AM3/+, AM4
 
What's In The Box
H7 Plus x 1
X-Bar™ Backplate x 1
Screw Pillars x 4
Screw Sleeves x 4
PWM Y-Cable x 1
CRYO-Paste CP7 x 1
Installation Guide x 1
Product Registration Card x 1

Compatibility Check




The Easiest Way To
Check if CRYORIG Fits


At CRYORIG, we are always coming up with new ideas on how to improve our user experience. Taking into account of the multitude of hardware combinations and the speed of new hardware hitting the market, we have come up with a innovative way of helping users solve the question of “Will it Fit?” in true modding/DIY spirit.

Enter the CRYORIG ORIGAMI COMPATIBILITY TESTER! All you need is a printer, some A4 sized paper, a ruler, and a pair of scissors to make your own CR ORIGAMI TESTER! Please always use recycled materials or used paper if available.

PRINT

Print your plans with a printer onto a piece of A4 sized paper.When printing making sure to use the following print options: Actual Size/True Size and Uncheck Fit To Page. Then use the Scale Check Zone at the bottom of the print out with your ruler, to see if you have a 1:1 print. Printing on thin cardboard or thicker materials are suggested but not required.

CUT

FOLD

COMBINE

TEST

Looking for support for this product?

Installation Guide Faq Product Warranty
Download the most up to date version of our installation guide in PDF format. Have questions about the product? Look up our FAQ section to find an answer! Read more about our Warranty Policy and find out how your product is protected.
Download File Head To Faq Warranty Policy
Register Contact us
Register your product now to receive up to 3 years of extended warranty! Can’t find information you’re looking for? Our customer support is here for you!
Register Now Customer Support
company name company name

2018 Cryorig llc. All rights reserved.

Term & Use

Privacy