CRYORIG Releases New Dual Fan Versions of Best Sellers H7 Plus and M9 Plus

AUGUST 6 2018, AM 08:51

OCTOBER 2 2018

CRYORIG announces new sTR4 Upgrade Clip Kit for majority of its products

Read the Full Article


 

MAY 30 2018

CRYORIG Reveals Crona 120 RGB Fan and H7 Ultra RGB Ahead of Computex 2018

Read the Full Article


 

MAY 22 2018

CRYORIG Announces Frostbit M.2 Cooler and C7 RGB for Computex 2018.

Read the Full Article


 

APRIL 18 2018

CRYORIG releases Full Copper C7 Cu Heatsink

Read the Full Article


 

NOVEMBER 28 2017

CRYORIG Updates QF120 System Fans with LED Variants

Read the Full Article


 

8.08.2018 Taipei, Taiwan. Enthusiast thermal solutions brand CRYORIG releases the new H7 Plus and M9 Plus dual fan heatsinks. Based on the best-selling H7 and M9i/a, CRYORIG is now offering these two models with a direct dual fan upgrade for best in class performance. Adding an additional fan makes the overall heatsink airflow even better optimized to expel heat directly into the rear system fan and out of the PC case. With an included PWM Y-Cable, users can have both front and back fan speed synced together for optima efficiency.







The H7 Plus is based on CRYORIG’s best-selling compact tower, the H7. Like the H7, the H7 Plus is also only 145 mm in height and even with the fans attached it completely avoids the RAM slots for Zero RAM Interference on the latest LGA1151/AM4 boards for both Intel™ and AMD™. Other thermal technologies include CRYORIG’s proprietary Hive Fin™ design for optimized airflow, Heatpipe Convex-Align™ optimization design and Quad-Air Inlet™ for added air intake on the dual 120 mm QF120 PWM fans. All together along with the new dual fan push-pull-setup is able to boost the thermal efficiency and performance of the H7 Plus.





The M9 Plus is based on CRYORIG’s M9i/a, the best in class mini tower. At a low height of 124,6 mm the M9 Plus assures Zero-Ram-Interference on both AMD™ and Intel™ platforms. Unlike the M9i and M9a, the M9 Plus is now compatible to both Intel™ and AMD™ platforms, making it an even easier upgrade for PC users to choose from. The M9 Plus’s dual 92 mm PWM fan system utilized the push-pull principle, hence optimizing airflow to efficiently move heat directly from the heatsink to the rear system fan and out of the case. Thanks to the included PWM fan Y-Cable, both the front and rear fan are synchronized for optimum performance.

Both the H7 Plus and M9 Plus are scheduled for world-wide release mid-August. MSRP for the US market is 44,45 USD( excl. taxes) for the H7 Plus and 24,45 USD( excl. taxes) for the M9 Plus. Euro-zone MSRP is 44,45 EUR (incl. VAT) and 24,45 EUR (incl. VAT):

H7 Plus Heatsink Specification
Dimension ( with fan ): L126 mm x W123 mm x H145 mm
Weight ( with fan ): 845 g
Weight ( without fan ): 577 g
Heat pipes: 6mm heatpipe x 3 units
Fin: T = 0.4 mm ; Gap = 2.2 mm
Fin Pcs: 40 pcs
Copper Base: C1100 Pure copper nickel plated
RAM Height Limit: Limitless
TDP: 150 W

H7 Plus Fan Specification
Model: QF120 Black Balance x 2
Dimension: L120 mm x W120 mm x H25.4 mm
Weight: 134 g
Rated Speed: 330 ~ 1600 RPM ±10 %
Noise Level: 25 dBA
Air Flow: 59 CFM
Air Pressure: 1.65 mmH2O
Ampere: 0.16 A

M9 Plus Heatsink Specification
Dimension ( with fan ): L98.4 mm x W102 mm x H124.6 mm
Weight ( with fan ): 505g
Weight ( without fan ): 345 g
Heat pipes: 6mm heatpipe x 3 units
Fin: T = 0.4 mm ; Gap = 1.6 mm
Fin Pcs: 40 pcs
Copper Base: C1100 Pure copper nickel plated
RAM Height Limit: Limitless
TDP: 130 W

M9 Plus Fan Specification
Model: CR9225 x 2
Dimension: L92 mm x W92 mm x H25.4 mm
Weight: 80 g
Rated Speed: 600 ~ 2200 RPM ±10 %
Noise Level: 26.4 dBA
Air Flow: 48.4 CFM
Air Pressure: 3.1 mmH2O
Ampere: 0.11 A

Product Page
http://www.cryorig.com/h7plus.php
http://www.cryorig.com/m9plus.php

 

 

 

 

 

company name company name

2018 Cryorig llc. All rights reserved.

Term & Use

Privacy