Patented DirectCompress™ Soldering, increases the actual contact surface between the heatpipe and heatsink fins. DirectCompress™ Soldering has up to 10% more contact surface compared to traditional soldering, and the more contact surface the faster the heat conduction.
and Making Room
On aluminum sheets, heat spreads out in a radial direction. By displacing the heatpipe alignment on the heatsink fins, our Heatsink Displacement Optimization™ allows for better and more evenly spread heat conduction on the fins compared to traditional linear alignment.
Accelerated Air Exhaust
The Faster the Cooler
The individual tower stack is separated into two sections, the loose air intake and the high density exhaust section. By the laws of fluid dynamics, the increase in fin count in the exhaust section squeezes airflow and increases exhaust air speed. The increase of airflow speed in our Jet Fin Acceleration System™ allows heated air leave the tower faster.
Total CPU Coverage
The R1’s Heatpipe Convex-Align™ System allows for more heatpipes in a given area, optimized heatpipe placement in the copper base, and improved alignment with your CPU. With the Heatpipe Convex-Align™ System, each heatpipe functions to their maximum TDP capacity.
Kill the Noise
Silence is Cold
Acoustics are just as important as performance. That’s why the XF140 140mm fan integrates acoustic optimizations. The XF140 features our High Precision Low Noise (HPLN™) Bearing and the detachable Acoustic Vibration Absorbers that give the fan a snugger fit while canceling vibration and noise at the same time.
Quick Mount System
Patent Pending "Multiseg™" Quick Mount System providing an all in one solution on Intel™ platforms, CRYORIG’s MultiSeg™ Quick Mount System allows for a securer and firmer installation within minutes.
With CUSTOMOD Covers
The fan covers for R1 is fully modular and replaceable with CRYORIG’s CUSTOMOD Covers. Available in all the major mainboard color schemes, choose your color based on your system’s general color scheme, or match together all your favorite colors. It’s your PC, why not make it personal! (CUSTOMOD Covers for R1 sold separately.)
Fast, Easy and Reliable
Install Within Minutes
CRYORIG products are planned from the ground up to be user friendly and easy to use. Watch how you can get your CRYORIG Product up and running within a few minutes.
|Dimension ( with fan )||L142.4 mm x W140 mm x H168.3 mm|
|Weight ( with fan )||1282 g|
|Weight ( without fan )||970 g|
|Heat pipes||6mm heatpipe x 7 units|
|Front Fin||T = 0.4 mm ; Gap = 2.4 mm|
|Front Fin Pcs||42 pcs|
|Rear Fin||T = 0.4 mm ; Gap = 1.8 mm|
|Rear Fin Pcs||53 pcs|
|Copper Base||C1100 Pure copper nickel plated|
|Distance From Center||40 mm|
|RAM Height Limit||30 ~ 35 mm ( Fan position adjustable )|
|R1 ULTIMATE VS R1 UNIVERSAL|
|Dimension||L140 mm x W140 mm x H25.4 mm|
|Rated Speed||700 ~ 1300 RPM ±10 %|
|Noise Level||19 ~ 23 dBA|
|Air Flow||76 CFM|
|Air Pressure||1.44 mmH2O|
|R1 Ultimate||Model Name||R1 Universal|
|142.4 x 140 x 168.3||Dimension||128.5 x 140 x 168.3|
|1282 g||Weight||1215 g|
|XF140 x2||Fan||XT140 x1 / XF140 x1|
|41 dBA||Noise||44 dBA|
|250 W +||Performance (TDP)||240 W +|
|40 mm||Distance From Center||35.5 mm|
|30 ~ 35 mm||RAM Height Limit||Limitless|
|INSTALLATION GUIDE||COMPATIBILITY LIST||FAQ|
|Download the most up to date version of our installation guide in PDF format.||Browse our product compatibility list to see if this product fits your system setup.||Have questions about the product? Look up our FAQ section to find an answer!|
|DOWNLOAD FILE||VIEW LIST||HEAD TO FAQ|
|PRODUCT WARRANTY||REGISTER||CONTACT US|
|Read more about our Warranty Policy and find out how your product is protected.||Register your product now to receive up to 3 years of extended warranty!||Can’t find information you’re looking for? Our customer support is here for you!|
|WARRANTY POLICY||REGISTER NOW||CUSTOMER SUPPORT|
The Easiest Way To
Check if CRYORIG Fits
At CRYORIG, we are always coming up with new
ideas on how to improve our user experience.
Taking into account of the multitude of
hardware combinations and the speed of
new hardware hitting the market, we have
come up with a innovative way of
helping users solve the question
of “Will it Fit?” in true modding/DIY
Enter the CRYORIG ORIGAMI
COMPATIBILITY TESTER! All you need is a
printer, some A4 sized paper, a ruler, and a pair
of scissors to make your own CR ORIGAMI
TESTER! Please always use recycled materials
or used paper if available.
First choose the CRYORIG Heatsink Model of choice, and select the correct socket type of your mainboard.
Print your plans with a printer onto a piece of A4 sized paper.When printing making sure to use the following print options: Actual Size/True Size and Uncheck Fit To Page. Then use the Scale Check Zone at the bottom of the print out with your ruler, to see if you have a 1:1 print. Printing on thin cardboard or thicker materials are suggested but not required.
Follow the scissor icon and cutout each part of the CR ORIGAMI TESTER. You will end up with the three parts: FIN, BASE TESTER and PIPE.
Fold the dotted lines on the FIN, BASE TESTER and PIPE. Glue or tape the winglet on the BASE TESTER to complete.
Combine the FIN, PIPE and BASE TESTER according to order.
Now place the BASE of the CR ORIGAMI TESTER directly on top of your CPU, so that the four sides of the BASE wraps perfectly around the protruding lid of the CPU. Now check If any sides or elements of the CR ORIGAMI TESTER interferes and or is bent by the components, then the compatibility test has been failed. If your CR ORIGAMI TESTER is not interfered by anything, then you have passed the compatibility test! Please note that our heatsink are mountable in different directions and orientations. If one direction does not fit, you can always try the tester in a different direction.
|News & Press|
|H7 Quad Lumi|
|FAN & ACCESSORIES|
|Case Depth Checker|
|Register My Product|
|Get AM4 Upgrade Kit|
|Where To Buy|